TC-Helicon GO XLR Quick Start Guide

14 15Quick Start GuideGO XLR
Welcome
About this document
This Quick Start Guide will help you set up, connect and begin
operating your GO XLR.
GO XLR App
The GO XLR app is REQUIRED to operate your GO XLR.
GO XLR app key features include:
• • EQ, Compress and Gate your mic
• • Set up and dei ne mixer controls
• • Change button/screen colors
• • Create and manage samples
• • Save voice FX settings
• • Direct access to product manuals
• • Access to TC Helicon support
Processing
PC-based Hardware
-Core 2 DUO CPU
-Ethernet port
-1 GB RAM
Recommended Operating Systems:
Windows*
-Windows 7, 32-bit or 64-bit
-Windows 8, 32-bit or 64 bit
-Windows 10, 32-bit or 64-bit
*Windows is either a registered trademark or trademark of Microsoft Corporation in
the United States and/or other countries.
Download the app
1. Download the GO XLR app:
a. Go to the GO XLR product page at tc-helicon.com/
products/goxlr.
b. Click on the Downloads tab.
c. Click on the download icon for the latest version of the
GO XLR app.
d. Follow the onscreen installation instructions.
2. You may be asked to reboot your computer.
3. Connect the GO XLR USB cable to your computer when app
installation is complete.
4. Power up GO XLR.
5. Dominate the Interwebs!
Get the Reference Manual
A full reference manual for GO XLR is also available on the
Minimum Hardware: downloads tab at tc-helicon.com/
products/goxlr.
Controls
(1) SCRIBBLE STRIPS for naming channels.
(2) CHANNEL FADERS control individual channel levels in
your mix.
(3) CHANNEL MUTE switches of the matching channel in
the mixer.
(4) VOICE FX PRESETS allow you to store up to six
eects presets.
(5) VOICE FX CONTROLS allow real-time control of the
assigned eects parameter.
(6) MEGAPHONE button adds distortion to your voice like
a megaphone.
(7) ROBOT button transforms your voice into a machine-
like robot.
(8) HARDTUNE tunes your voice to the sound of your music
or game.
(9) FX turns on or of all voice FX.
(10) !@#$* button lets you instantly censor and “bleep out”
your mic.
(11) “COUGH” mutes your microphone while the button
is held.
(12) SAMPLE PADS hold selected samples and bumpers for
instant recall. Hold a button to record a new sample, and
then press to play back. Press CLEAR and then one of the
four sample pads to clear that sample.
(13)
SAMPLE BANK organizes samples and bumpers into groups for
instant recall.
(10)
(11)
(12)(13)
(4) (5) (6)
(7)
(1)
(2)
(3)
(8)
(9)

TC-Helicon GO XLR Specifications

General

Frequency range	10 - 20000 Hz
Channels quantity	- channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
Line Signal-to-Noise Ratio (SNR)	101 dB
Equalizer bands quantity	4
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of microphone inputs	1
DJ mixer	-
Product color	Black
USB connector type	USB Type-B
Fuse	1 A
Phantom power	48 V
Power consumption (typical)	10 W

Weight and Dimensions

Depth	174 mm
Width	285 mm
Height	82 mm
Weight	1550 g