TC-Helicon GO XLR - Setting Up Your Microphone; Setting the Input Level; Microphone Processing Setup

Please register your GO XLR
To register your GO XLR using the GO XLR app, launch GO XLR and click on the ACCOUNT button.
Registration of your product is NOT required to use GO XLR, update Firmware or contact support.
Specifications
Analog Connections
XLR In 1 x XLR, balanced
Phantom power
+48 V, switchable via
control app
Line In 1 x 1/₈” TRS, stereo
Mic
1 x 1/₈” TRS, biased for
computer microphone
input
Phones 1 x 1/₈” TRS, stereo
Line Out 1 x 1/₈” TRS, stereo
Controls
Motorized faders 4
Backlit LCD scribble
strips
4
Rotational encoders 4
Lighting RGB
Buttons 24
System / Processing