TC-Helicon VoiceLive 3 Reference Manual

Setup
VoiceLive 3 – Reference manual (2014-03-29) 100
Split Direction parameter
It is possible to define a specific area of your
keyboard for VoiceLive3 to respond to. Use the
Split Note parameter to define a split point. Use
the Split Direction parameter to control whether
notes above or below that note are included.
– Above: Any notes above the Split note are
“listened to” for MIDI note information.
– Below: Any notes below the Split note are “lis-
tened to” for MIDI note information.
Vibrato Boost parameter
Use the Vibrato Boost parameter to set how
VoiceLive3 should process incoming MIDI mod-
ulation data.
Parameter settings:
– Boost: The modulation data received via MIDI
is added to the vibrato already applied to Har-
mony voices.
– Manual: The modulation data received via
MIDI is directly controlling the Vibrato amount.
Pitchbend Range parameter
Use the Pitchbend range parameter to define the
range that pitch bend information can affect the
current note(s). This value is represented in semi-
tones. The default value is 12 (1 octave).

TC-Helicon VoiceLive 3 Specifications

General

Outputs	XLR, 1/4"
MIDI	In/Out
USB	USB for audio I/O and firmware updates
Inputs	XLR, 1/4"
Power Supply	External power supply (included)