TC-Helicon VoiceTone C1 - Connecting

Connecting
MIC jack-ConnectyourmichereusingabalancedXLRcable.
Phantom power is always on.
OUT jack-ConnecttoyourPAmixer,anotherVoiceTonepedal
or powered speaker.
Power in-Connectthesupplied12VDCpowersupply.
Optional:
USB -ConnecttoacomputerrunningtheTC-Helicon
VoiceSupportapplicationforregistration,latestversionandtips.
INST IN-Chordsplayedonthisinstrumentwillberecognized
when the Key selector is set to Chromatic.
INST OUT-ConnecttoaPAorguitaramptohearyour
instrument.
PA
PA
• Turn down your PA when making all connections
• ThelatestversionofVoiceSupportisavailablefreefromwww.tc-helicon.com/voicesupport
• TheUSBconnectiondoesnotprovidepowertotheunit
• IfyouhearhumfromyourPAoramp,pushtheGRNDLIFTin.Otherwise,itshouldremainout.