EasyManuals Logo

TCL 10SE User Manual

TCL 10SE
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
71 72
• Touch Disable, National roaming only or All networks.
• When data roaming is disabled, you can still perform data
exchange with a Wi-Fi connection (refer to “9.1.2 Wi-Fi”).
To set preferred network mode
• Touch Settings > Network & internet > Cellular network >
Preferred network type.
9.1.2 Wi-Fi
You can connect to the internet when your phone is within range of
a wireless network. Wi-Fi can be used on your phone even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & internet > Wi-Fi.
• Turn on .
• Once Wi-Fi is turned on, detected Wi-Fi networks are listed.
• Touch a Wi-Fi network to connect to it. If the network you
selected is secured, you are required to enter a password or
other credentials (you may need to contact the network carrier for
details). When finished, touch CONNECT.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to
your preference.
• Touch Settings > Network & internet > Wi-Fi > Add network.
• Enter the name of the network and any required network
information.
• Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks
which you no longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• On the Wi-Fi screen, touch and hold the name of the saved
network.
• Touch FORGET in the dialog that opens.
9.2 Connecting to a Bluetooth device
Bluetooth is a short-range wireless communication technology that
you can use to exchange data, or connect to other Bluetooth devices
for various uses.
To turn on Bluetooth
• Touch Settings > Bluetooth & device connection > Bluetooth.
• Turn on .
Your device name and other available devices will appear on screen.
To rename your device
• Touch Settings > Bluetooth & device connection > Bluetooth >
Device name.
• Enter a name, and touch RENAME to confirm.
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on
and pair your phone with the Bluetooth device with which you want
to exchange data.
• Touch Settings > Bluetooth & device connection > Bluetooth >
Pair new device.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TCL 10SE and is the answer not in the manual?

TCL 10SE Specifications

General IconGeneral
Display Size6.52 inches
Resolution720 x 1600 pixels
RAM4 GB
Rear Camera48 MP + 5 MP + 2 MP
Front Camera8 MP
Battery Capacity4000 mAh
Operating SystemAndroid 10
SIMDual SIM (Nano-SIM, dual stand-by)
Weight166 g
Internal Storage64 GB, 128 GB
ProcessorMediaTek Helio P22 (MT6762)

Related product manuals