TCL HH130VM - Advanced settings

21
Settings
5.5 
5.5.1 
Basic
SetuptheWANconneconmodeandparametersinthisopon.Youcansettheconneconmode
toDHCP,PPPoEorStacIP.
y
DHCP
:DynamicHostConfigurationProtocol(DHCP)isaclient/serverprotocolthat
automaticallyprovidesyouwithaninternetProtocol(IP)host.TheIPaddressandrelated
conguraonsengssuchassubnetmaskanddefaultgatewayareallautomacallyassigned.
SelectDHCPandclick
Apply
.
y
PPPoE
:PPPoEstandsforPoint-to-PointProtocoloverEthernet.Thisisanetworkprotocolthat
ismainlyusedforDSLserviceswhereindividualusersconnecttoamodemusinganEthernet
connecon.Entertheusernameandpasswordprovidedbyyournetworkserviceproviderand
click
Apply
.
y
Static IP
:accesstheinternetusingafixedIPaddress,subnetmask,gatewayIPaddressand
PrimaryDNSserver,theseshouldbeprovidedbyyournetworkserviceprovider.
MAC Clone
UsingtheMACClonefuncon,mulpleclientscanconnecttothedeviceandaccesstheinternet.
YourcurrentMACaddressisdisplayedhere.Click
Reset
tosetanewMACaddress.Click
Clone
to
copyyourhostMACaddress.