TCS 700-40 - Table of Contents; Safety Warning Symbols

TCS900004, Rev.4
07/12/2016
Check us out at www.TCSmeters.com
Page 2
Table of Contents
Warning Symbols
CAUTION
Follow the warning instructions within the
following information to avoid equipment
failure, personal injury or death.
TURN POWER OFF
Before performing any maintenance, be sure to
turn system power off to avoid any potential
electric spark
FLAMMABLE
Flammable liquids and their vapors may cause a
fire or explosion if ignited.
EYE PROTECTION
Pressurized systems may cause hazardous leaks
and spray that may be dangerous for your eyes.
Always wear eye protection around pressurized
systems and its hazardous liquids.
INJURY
Wear gloves for protection from hazardous
liquids that may cause irritation or burns.
READ
Read and understand all related manuals
thoroughly. The Engineering and OIM manuals
will provide the knowledge for all systems,
maintenance and operation procedures. If you
have any questions, please consult the factory.
Safety Warning Symbols 2
Receipt & Inspection
Notice 3
Meter Specifications
Meter Types
Material of Construction
System Recommendations
System Recommendations (Continued)
System Recommendations (Continued)
Above Ground Storage System
Mobile Fueling System
Start Up Recommendations 11
Start Up Recommendations (Continued) 12
Direction of Flow 12
Meter Calibration
Meter Calibration (Continued)
Air Eliminator Strainer Assembly 24
Air Eliminator Strainer Assembly (Continued) 25
Hydraulic Preset Valve Assembly
Hydraulic Preset Valve Assembly (Continued)
Torque Specifications
Disassembly of Meter 29
Disassembly of Meter (Continued) 30
Disassembly of Meter (Continued) 31
Disassembly of Meter (Continued) 32
Inspection of Parts 33
Assembly of Meter 34
Assembly of Meter (Continued) 35
Assembly of Meter (Continued) 36
Assembly of Meter (Continued) 37
Disassembly of Strainer 38
Assembly of Strainer 38
Disassembly of Air Eliminator 39