Need help?Do you have a question about the TCS 700-30 and is the answer not in the manual?
General| Accuracy | ±0.5 % of span |
|---|---|
| Resolution | 0.1 °C |
| Protection Class | IP65 |
| Measurement Range | 0...+50 °C, 0...+100 °C, 0...+150 °C |
| Output Signal | 4...20 mA |
| Process Connection | G 1/2 |
| Storage Temperature | -40°C |
Explains various warning symbols and provides safety instructions for equipment operation.
Details different models of TCS rotary meters and their applications.
Guidance on choosing the correct flow meter and the importance of air elimination.
Recommendations for optimal piping setup, debris protection, and thermal expansion.
Addressing thermal shock, hydraulic shock, product characteristics, and calibration.
Instructions on how to change the meter's flow direction from left-to-right to right-to-left.
Guidance on using, setting, and wetting provers for accurate calibration.
Steps for performing tests, determining results, and understanding tolerances.
Detailed explanation for adjusting calibration and applying temperature corrections.
Procedure for testing meters with multiple compartments in a vehicle tank.
Procedure for testing meters with single-compartment tanks.
Specific steps for split compartment testing when using a quick-connect coupling.
Recommended procedures for storing the meter during short or long periods of non-use.
Steps for removing the dust cover and calibration adjuster from the meter.
Procedures for draining the meter, removing covers, and parts like packing capsule.
Detailed steps for removing rotor gears, bearing plates, and associated components.
Instructions for reinstalling rotors, timing gears, and securing them properly.
Steps for reinstalling bearing plates, rotor gears, and covers after inspection.
Procedures for reassembling the packing capsule, counter support, and adjuster.
Detailed steps for disassembling and reassembling the 750-30 hydraulic valve.
Instructions for disassembling and reassembling the 760 air check valve.
Addresses common issues like leaks, register malfunction, no flow, and slow flow.
Diagnosing issues with air eliminator vents and registration of air in the system.
Troubleshooting valve closure, premature shut-off, and volume registration errors.
To Next Page
