Need help?Do you have a question about the TDK A33 and is the answer not in the manual?
Pry kickstand attachment leg from hole using a flathead screwdriver. Repeat on other side.
Use a Torx head screwdriver (size T-6) to remove 6 screws securing the battery door.
Use a flathead screwdriver to pry the battery door from the housing, noting adhesive tape.
Carefully remove the old battery from the device housing.
Unplug the housing connector from the old battery and connect it to the new battery.
Securely re-install the battery cover onto the device.
Re-install the 6 screws that were previously removed.
Snap both ends of the kickstand back into the speaker housing.
General| Recommended usage | Mobile phone / Smartphone |
|---|---|
| Impedance | - Ω |
| Frequency range | - Hz |
| RMS rated power | - W |
| Product type | 2.1 portable speaker system |
| Product color | Black |
| Product design | Soundbar |
| Protection features | Dust resistant, Water resistant |
| International Protection (IP) code | IP64 |
| Wi-Fi | No |
| AUX in | Yes |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, HFP, HSP |
| Connectivity technology | Wired & Wireless |
| Battery type | Built-in |
| Power source type | Battery |
| Battery life (max) | 6 h |
| Package depth | 130 mm |
| Package width | 301 mm |
| Package height | 132 mm |
| Package weight | 1656 g |
| Packaging standard | 55-0000-9033-6 |
| Woofer diameter | 63.5 mm |
| Number of drivers | - |
| Number of speakers | 1 |
| Audio output channels | 2.1 channels |
| Subwoofer driver diameter | 38.1 mm |
| Output current | 1 A |
| EAN/UPC/GTIN (packaging) | 54902030789201 |
| HTS (EU) | 8518.22.00 90 |
| Pallet width | 800 mm |
| Pallet height | 984 mm |
| Pallet length | 1200 mm |
| Pallet weight | 186000 g |
| Quantity per pallet | 96 pc(s) |
| Master (outer) case width | 318 mm |
| Master (outer) case height | 289 mm |
| Master (outer) case length | 280 mm |
| Master (outer) case weight | 5170 g |
| Number of layers per pallet | 3 pc(s) |
| Shipping (inner) case width | 286 mm |
| Number of cartons per pallet | 24 pc(s) |
| Shipping (inner) case weight | 7099 g |
| Quantity per master (outer) case | 4 pc(s) |
| Number of cartons per pallet layer | 8 pc(s) |
To Next Page
