Need help?Do you have a question about the Teac FD-55 Series and is the answer not in the manual?
Step-by-step guide for inserting and removing disks.
Details on connecting interface and power cables.
Configuration through straps and terminator networks.
Explanation of strap settings for drive addressing and configuration.
Observing and mitigating inductive and switching noise.
Procedure to reset the read/write head to track 00.
Steps involved in moving the head to a target track.
Sequence and safety for FDD power cycling.
Step-by-step guide for inserting and removing disks.
Details on connecting interface and power cables.
Configuration through straps and terminator networks.
Explanation of strap settings for drive addressing and configuration.
Observing and mitigating inductive and switching noise.
Procedure to reset the read/write head to track 00.
Steps involved in moving the head to a target track.
Sequence and safety for FDD power cycling.
General| Type | Floppy Disk Drive |
|---|---|
| Disk Size | 5.25 inch |
| Average Access Time | 94 ms |
| Capacity | 1.44 MB |
| Data Transfer Rate | 500 Kb/s |
| Power Supply | +5V and +12V DC |
| Rotation Speed | 300 RPM |
To Next Page
