28
2. You can press "STOP" key to stop record function after confirm
How to Time shift
1. In the DTV source,you can start timeshift function by press the “PLAY/PAUSE” key
while program playing. Before that, you have to make sure the USB storage device is
inserted and the device checking and Initialization is done.
If you press “PLAY/PAUSE” key when there’s no USB storage device inserted, the
prompt window will appear as follow.
If you press “PLAY/PAUSE” key during the device checking and Initialization, the
prompt window will appear as follow. If you press “PLAY/PAUSE” key during the
device checking and Initialization, the prompt window will show black screen about
2s.when the TV is timeshifting, it will appear the timeshift menu.
2. After timeshift started, you can select the items for the founctions:
PLAY/PAUSE/STOP/AB/FF/FR/PRVE/NEXT。You can seen the detail info by the
timeshift menu.
PLAY/PAUSE: you can set the play mode PLAY/PAUSE;
STOP: you can stop the recording, it will appear the menu for check whether to stop
the recording.
AB: you can set two point for play the record file from A to B.
FF/FR: you can set the play mode FF/FR;
PRVE/NEXT: you can play the record file to PRVE/NEXT 30s.
3. After record started, you can press the button of PLAY/FF/FR/PRVE/NEXT on the
RC ,you can play the record file by PALY/PAUSE/FF/FR/PRVE/NEXT/STOP.
4. you can press “STOP” key to jump to the realtime broadcast of the program,
and another press of “STOP” key, you can stop timeshift function after confirm.
To Next Page
Loading...
