Teac LP-P1000 - Changing the Display

40
About MP3/WMA files (2)
Changing the display
Each time you press the INFO button, the information
on the display changes as follows.
o The first 32 characters of the song/artist/album
names are shown.
o If the file information uses Japanese, Chinese or
other double-byte characters, playback is possible
but information will not be shown correctly on the
display.
o After each item of information scrolls across three
times, the elapsed playback time will appear again.
o When a WMA disc is loaded, “WMA” will appear on
the left side of the display.
Selecting folders and files
To select a folder by number, use the main unit's search
(m/,) buttons.
When using the remote, use the MP3 (j/k) buttons.
To select a file by number, use the main unit's scroll
(MULTI JOG) knob.
o After selecting the folder/file number, press the play/
pause (y/9) button to start playback.
If the play button is not pressed within five seconds,
the disc information will appear on the display.