Repeat/intro/shuffle playback (CD)
Programmed playback (CD) (cont’d)
When the CD function is active, press the PLAY MODE but-
ton to cycle through the following playback modes.
REPEAT (single track/file repeat)
REPEAT FOLDER
(MP3/WMA files only)
REPEAT ALL (all track/file repeat)
INTRO (intro playback)
SHUFFLE*
OFF (normal playback)
Press the play/pause (y/9) button when the mode you
want to select appears to start playback.
*If shuffle is selected, playback starts automatically.
o You can also change the playback mode by pressing
the PLAY MODE button during playback.
o Any of the following operations will end repeat or shuf-
fle playback mode.
•The stop (8) button is pressed
•The unit enters standby mode
• When you press a function button (Bluetooth or FM/
AM) on the main unit or the FUNCTION button on the
remote control to change the function
•The disc lid is opened
Clearing all the program contents
Press for at least
2 seconds
Press and hold the stop (8) button for at least two sec-
onds when stopped.
The contents of the program are cleared, and the display
MEMORY indicator becomes unlit.
o The program is also cleared in the following cases.
•The unit enters standby mode
• When you press a function button (Bluetooth or FM/
AM) on the main unit or the FUNCTION button on the
remote control to change the function
•The disc lid is opened
22
To Next Page
Loading...
