Teac SL-D920 - Setting the Timer 1; Timer Setting Mode Activation; Setting ON Time; Setting OFF Time

28
You can set the timer that can be used to play or record at
the specified time.
Set the clock before setting the timer.
1
Press and hold the TIMER button for more than
2 seconds.
“ON” is displayed and the hour value blinks.
The hour value blinks.
< If no button is pressed for 10 seconds, timer setting
mode will end.
2
Use the SKIP (
.
/
/
) buttons to set the hour,
and then press the TIMER button.
The minute value blinks.
TIMER
3
Use the SKIP (
.
/
/
) buttons to set the
minute, and then press the TIMER button.
Now the ON time is set.
Next, “OFF” is displayed and hour value blinks.
4
Use the SKIP (
.
/
/
) buttons to set the hour,
and then press the TIMER button.
The minute value blinks.
5
Use the SKIP (
.
/
/
) buttons to set the
minute, and then press the TIMER button.
Now the OFF time is set.
“PLAY” or “REC” is displayed.
Setting the Timer 1