Teac SR-L50 - Setting the Clock; Setting Clock Display; Setting Current Time

20
Clock Adjustment
In the CD mode or the TUNER mode, press the
DISPLAY button to select clock display.
“:” blinks in the clock display.
<
If the AUX is selected or the unit is off, press and
hold the MEMORY/CLOCK ADJ button for 2 or more
seconds, and continue the procedure from step .
<
Press the STOP button to cancel the time setting. (In
the TUNER mode, press the DISPLAY button.)
Within 4 seconds, press and hold the
MEMORY/CLOCK ADJ button for 2 or more seconds.
Press the .m
or ,/ button to select
“12H” or “24H”.
If you select “12H”, “AM” indicator appears in the
morning and “PM” indicator appears after noon.
<
In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJ button.
4
3
2
3
1
Press the .mor,/ button to set the
current hour.
<
In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJ button.
Press the .m
or,/ button to set the
current minute.
<
In the TUNER mode, use the TUNING button.
Press the MEMORY/CLOCK ADJ button to finish the
time setting mode.
The clock starts from 00 second.
<
If the unit is disconnected from the power supply for
more than 3 minutes, the clock and timer setting will
be reset.
<
If the unit is disconnected for less than 3 minutes
the time displayed may not be correct.
8
7
6
5
MEMORY/CLOCK ADJ
DISPLAY .m ,/