ENGLISH
7
Connection
How to connect external sources
< Read instructions of each component you intend to
use with this unit.
<
Make sure to connect:
<
Be sure to insert each plug securely. To prevent
hum and noise, do not bundle the connection cords
with the power cord or speaker cord.
CAUTION: Do not plug the power cord of any
component into AC outlets and do not turn their
POWER switches on until all connections have been
performed.
Connection of FM antenna
(U.S.A./Canada and General export models only)
Connect the lead-type FM antenna to the FM antenna
terminal. Secure it in the location providing optimum
reception.
In an area where FM signals are weak, 75-ohm
unbalanced-type outdoor FM antenna (3 elements or
more) is recommended.
To Next Page
Loading...
