Teac Z-6000 - 4 VOLTAGE ADJUSTMENTS AND CHECKS; VOLTAGE CONVERSION; DC VOLTAGE ADJUSTMENTS AND CHECKS

2-6000 |
4 VOLTAGE ADJUSTMENTS AND CHECKS a |
GREE OME & HERE
4-1 VOLTAGE CONVERSION
(GENERAL EXPORT MODELS ONLY)
1. Always disconnect the power line cord before’ mn these
adjustments. a ae
_ 2, Locate the valtage select ave the cantina
3, Using a regular screwiltiver, turn the ‘selector until. the: vumbrak _
correspanding to the voltage: om ements. of your area appear; ©: -.. °
Fig. 4-1 Voltage conversion (FRIES )
4-2 OC VOLTAGE ADJUSTMENTS AND CHECKS
1. See p. 4 fig. 3-4 for adjustment and check paints.
2. Adjust R53 so that the voltage of the POWER SUPPLY PCB
TP.7 becomes +5.8 V.
. Adjust R68 for a TP.2 voltage of +25 V.
4, Make sure TP.3 voltage is-+15 V + 0.75 y, TP.4 voltage ~ -T5 VV
+ 0.75 V, and TP.5 voltage +13.5 Ve 0.67 V.
ww
4-2 DCBREtCFxryv7
ke.
MERU Fry 2K blhdAAK—VORM3-LeSMCT
Pau,
. POWER SUPPLY PCB@ TPM ILA +5.8V CmRSH
R53 Ga SS.
3. TP.20%F D+28V ESA ROBE oO.
. TP.8O RAST 15V £0.75, Ce eee
TP5@ RIED + 13. SEOSIVTBSE SHES 3.