○ Start/ Stop discovery - Start/ End
sensor search
○ Add a new sensor - Manually add
sensor
○ Delete all sensors - Remove all
○ No insta. - disable it for the TANGO II
● Vario - Generates the tone/sound of a glider
variometer
○ Source - Specify data source
○ Range - Usable signal range
○ Center - Equilibrium value
The display screen is where the telemetry view screens
are configured
● Screen 1-4 - Specific telemetry values
● Show them by long pressing the page button
on the mian screen
To Next Page
