Getting ready
Getting set up and ready to fly is a quick and simple task. In most cases plug&play when using TBS
equipment.
Power up
Press and hold the Power-button for three seconds until the animation completes. The TBS TANGO II
screen will welcome you and the power button lights up yellow.
USB Joystick
Plug-in a USB-C cable and a menu will appear where you can activate USB joystick mode. This mode will
work with the most common simulators available.
SD card content
The latest SD card content for sound files and scripts can be found on the TBS website.
The maximum allowed size is 32GB. Card with higher capacity must be formatted in FAT32 format (only
32GB will be available then).
FAQ
If you got any question after reading this manual you should visit the TBS FAQ section
Note
This manual is written based on the FreedomTx fw 1.20 and Crossfire 3.73. If some functions are not
available for you, please update your build in Crossfire and the Tango II fw to these (beta) firmwares.
To Next Page
Loading...
