TEC MA-1350-1 Series Programming Manual

- 20 -
EO3-11084
MA-1350-1 SERIES
Key Code Key Name
144 CLK2 (Cashier 2)
145 CLK3 (Cashier 3)
146 CLK4 (Cashier 4)
147 CLK5 (Cashier 5)
148 CLK6 (Cashier 6)
149 CLK7 (Cashier 7)
150 CLK8 (Cashier 8)
7
6
▼
▼
AT/TL
(The BLIND position is the
unmarked step next to “Z”.)
To declare Key Installation Setting.
▼ ▼
AT/TL
▼
▼
Only to read the Key Code currently set on the key.
Key Code (max. 3 digits;
see the List of Keys on
the preceding page 5.)
▼
...........
Displays the en-
tered Key Code in
the AMOUNT por-
tion , as it is en-
tered.
Repeat for all
the keys to be
newly installed,
for location
changes, or for
reading Key
Codes already
set.
Depress the key to be set
with the Key Code. Displays
the Key Code set or read , in
the AMOUNT portion.
Depress the [AT/
TL] key to com-
plete the Key In-
stallation Setting
operation.
*1. At least one Department Key is required to be installed.
*2. The [#/NS] key has both [#/CID] and [NS] functions. Therefore, when [#/NS] is installed, neither [#/
CID] nor [NS] are necessary. (At least, either [#/NS] or [#/CID] must be installed.)
*3. When the Signing Method is selected for the cashier-identifying operation, this key must be in-
stalled. If this method is not selected, this key merely functions as Receipt ON/OFF key.
Key Installation Setting
Condition: After all Daily and Periodical Resets
Setting Procedure:
Use the S Key to turn the Control Lock to the “BLIND” position.
Z
REG
X
SET
-
OFF
(BLIND)
MGR

TEC MA-1350-1 Series Specifications

General

Brand	TEC
Model	MA-1350-1 Series
Category	Cash Register
Language	English