TEC MA-600 Series - User Manual

Other manuals for TEC MA-600 Series

Programming Manual191 pages

Maintenance Manual52 pages

Questions and Answers

C
Christopher GarciaJul 29, 2025
How to fix a TEC MA-600 when the power is not turned on?
- W
  wayneshieldsJul 29, 2025
  If your TEC Cash Register isn't turning on, there are several potential causes: * The fuse in the PS unit may have blown, requiring a fuse replacement. * The input voltage to the ECR might not be within the rated voltage. Check the power supply to the AC outlet using another electric appliance. If there's no power, contact your power company. * There may be a failure of the POWER PC Board, necessitating replacement of the PS Unit. * A failure of the MAIN PC Board could also be the cause, requiring its replacement.
S
Stephen RobertsAug 3, 2025
What to do if the printer does not print on my TEC MA-600?
- L
  Linda McdonaldAug 3, 2025
  If your TEC Cash Register printer isn't working, consider the following potential causes: * A faulty FPC Cable might be the issue; try replacing it. * The Printer Unit itself could be failing, requiring its replacement. * A failure of the MAIN PC Board might also be the reason, so consider replacing it.
E
Eric JohnsonAug 7, 2025
Why is nothing displayed on the RIU of my TEC MA-600 Cash Register?
- M
  Matthew LloydAug 7, 2025
  If nothing is displayed on the RIU of your TEC Cash Register, it could be due to: * A failure of the RIU Unit, requiring its replacement. * A failure of the KBIU PC Board, also requiring replacement.
M
Mia BellAug 11, 2025
What to do if nothing is displayed on the LCD of my TEC MA-600 Cash Register?
- S
  Shannon NicholsAug 11, 2025
  If nothing is showing on the LCD display of your TEC Cash Register, it could be due to: * A failure of the LCD Assembly, requiring replacement of the FIU PC Board. * A failure of the MAIN PC Board, which would also need to be replaced.
R
robinsonkendraAug 15, 2025
Why is no key entry accepted on my TEC MA-600 Cash Register?
- Y
  ysantiagoAug 15, 2025
  If your TEC Cash Register isn't accepting any key entries, it might be due to: * A failure of the Keyboard Unit, requiring its replacement. * A failure of the KBIU PC Board, which would also need replacement. * A failure of the MAIN PC Board, also requiring replacement.
W
walkerheatherAug 20, 2025
What causes nothing to be displayed on the 7-segment display of my TEC MA-600 Cash Register?
- M
  Mrs. Paige JohnsonAug 20, 2025
  If nothing is displayed on the 7-segment display of your TEC Cash Register, the possible causes are: * A failure of the FIU PC Board, which means you should replace the FIU PC Board. * A failure of the MAIN PC Board, which also needs replacement.
C
cavilaAug 25, 2025
How to troubleshoot a TEC MA-600 Cash Register when a specific key entry is not accepted?
- A
  Alvin OconnellAug 25, 2025
  If a specific key on your TEC Cash Register isn't working, the issue might stem from: * A failure of the Keyboard Unit or the FPC Cable, suggesting you replace the Keyboard Unit. * A failure of the KBIU PC Board, which would also need replacement. * A failure of the MAIN PC Board, also requiring replacement.