TEC MA-600 Series User Manual

4. PROGRAMMING OPERATIONS EO1-11154
4.1 Instructions for Programming
4- 2
4.1 Instructions for Programming
On the MA-600 series adopting the LCD display, each programming operation is performed by selecting the
corresponding menu item on the LCD display.
The keyboard layout is automatically changed in three types according to operation to be performed (ordinary
registration, read/reset, programming) when the Mode Lock is turned to the corresponding position.
Accordingly, in addition to the character code entry method, the character entries in programming operations are
also performed directly through the ordinary type keyboard.
4.1.1 Types of Keyboard Layouts
The keyboard layout is automatically changed in three types when the Mode Lock is turned to the corresponding
position. That for programming operation is used in this chapter.
(1) Keyboard layout for ordinary registration (It is programmed as default setting.)
Mode Lock Position: REG, MGR,
• Ordinary Type Keyboard
LOG/
RECEIPT
VALI
DATE
RECIPT
ISSUE
RF JF
1 6 11
CUR
SALES
PERSON
RTN
MDSE
ALL
VOID
C #
2 7 12
R/A PO
NS
ITEM
CORR
7 8 9
3 8 13
%-
PR
OPEN
X 4 5 6
4 9 14
VAT MISC
LC
OPEN
AMT 1 2 3
51015
CRT CPN
PLU 0 00
.
ST AT/TL
CHK
TEND
• Flat Type Keyboard
18
LOG/
RECEIPT
RECIPT
ISSU
RF JF R/A PO
29
ITEM
CORR
VOID
RTN
MDSE
ALL
VOID
%-
310
# C NS VAT CUR
411
AMT 5 8 9 CRT
512
X 4 5 6
CHK
TEND
613
1 2 3 ST
714
PLU
0 00
.
AT/TL
Department
keys
PLU preset-code keys

TEC MA-600 Series Specifications

General

Brand	TEC
Model	MA-600 Series
Category	Cash Register
Language	English