4. PROGRAMMING OPERATIONS EO1-11154
4.20 Foreign Currency Exchange Rate Setting
4-60
4.20 Foreign Currency Exchange Rate Setting
In this program, the rate of each foreign currency (corresponding to the [CUR1] to [CUR5] keys) will be set. By
setting a rate on each Foreign Currency Key, reading the sale total and tendering in the foreign currency value
will be possible for sale finalization.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode
Depress [↓] three times then [Enter].
or
Depress [4].
“4 RATE, LIMIT AMOUNT” is selected.
Depress [↓] twice then [Enter].
or
Depress [3].
“3 CUR EXCHANGE RATE” is selected.
Input the rate of [CUR1] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR2] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR3] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR4] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
Input the rate of [CUR5] key, then
depress [Enter].
0,000001 to 9999,999999 (%): Use the [.] key if decimal portion is
contained. (See NOTE below.)
[End]
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
NOTE: When inputting 0, the rate of the foreign currency will be cancelled. If doing so, the rate of the foreign
currency should be set at the registration operation.
OPERATION
CONDITION
To Next Page
Loading...
