4. PROGRAMMING OPERATIONS EO1-11154
4.14 Salesperson Name Programming
4-36
4.14 Salesperson Name Programming
By programming Salesperson here, the name of each salesperson can be programmed in a maximum of 12
characters.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 NAMES” is selected.
Depress the [↓] key four times then
[Enter] key.
or
Depress [5].
“5 SALESPERSON NAME” is selected.
Select a salesperson of which name is
to be programmed with the [↑] or [↓]
key.
The salesperson name already programmed is displayed.
[Enter]
The ECR enters salesperson name input mode.
Input a salesperson name.
A maximum of 12 one-byte or 6 two-byte characters are input.
[Enter]
The salesperson name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTES: 1. A maximum of 30 salesperson names can be set. The salesperson codes 1 to 30 are fixed.
2. A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of
both types is also available.
OPERATION
CONDITION
31-10-2005 MON #0
PLU NAME
0001 Tomato
0033 18:33TM
To Next Page
Loading...
Need help?
General
