11. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11154
11.36 Salesperson Entry (Salesperson Sign-ON)
11-23
11.36 Salesperson Entry (Salesperson Sign-ON)
This operation is used for performing sales management of each salesperson.
|Salesperson Code
| [SALES PERSON] - - -
1 to 30
... The name of the person is displayed and printed on both journal and receipt.
Programmable options relating to Salesperson Entries:
• Salesperson’s name non-print on receipt (print on journal only)
• Salesperson Entry compulsory before sale item entries
• Salesperson Entry Prohibited during a sale (i.e. allowed only one person entry at the starting of a sale but
prohibits any other salesperson entry once the sale is started.) When this program option is not selected,
up to five salespersons can sign-ON during one sale.
The salesperson entry status (salesperson Signed-ON condition) will be held until:
• Another salesperson entry is operated, or
• The sale is finalized.
NOTES:
1. After a Salesperson Entry, the mode change is prohibited.
2. When the Cashier Interrupt feature has been selected, the Salesperson
Entry may cause an error.
11.37 Receipt-Issue/Non-Issue Selection
Receipts are issued or not issued according to the “R OFF” lamp illuminated/extinguished status on the Operator
Display panel.
“R OFF” (Receipt OFF) Lamp Status Change Operations
([LOG/RECEIPT] = [RECEIPT]).
Mode Lock may be in any position
[LOG/RECEIPT]
Extinguished [LOG/RECEIPT] Illuminated
Receipt ON Status Receipt OFF Status
NOTES:
1. The “R OFF” lamp status at the starting of a transaction entry decides whether a receipt will be issued for the
transaction or not. Switching the Receipt ON/OFF status during a transaction will not be effective.
2. If a transaction entered with the “R OFF” lamp illuminated and finalized but a receipt is required, the
[RECEIPT ISSUE] (Post-issue Receipt) key can be operated to issue a receipt.
3. Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is depressed with a prior numeric
entry in REG mode, it may turn out to be a Sign ON or Sign OFF operation (in case of Cashier Code Entry
Method).
4. Receipt-issue or non-issue cannot be selected after a non-add number print or salesperson entry.
5. Even when the ECR is in the Receipt-OFF mode, a receipt after taking a reset report is issued.
OPERATION
Salesperson Code
Salesperson’s Name
02 Stacy
-- Receipt Print Format --
To Next Page
Loading...
Need help?
General
