4. PROGRAMMING OPERATIONS EO1-11154
4.12 Department Group Name Programming
4-32
4.12 Department Group Name Programming
In this operation, the name of each Group is programmed. Which Departments are linked to each Group has
already been set in the DEPARTMENT TABLE PROGRAMMING operation.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
ECR is being outside a sale and in SET mode.
Depress [↓] then [Enter].
or
Depress [2].
“2 Names” is selected.
Depress [↓] then [Enter].
or
Depress [2].
“2 DP GROUP NAME” is selected.
Select a department group of which
name is to be programmed with the [↑]
or [↓] key.
The department group name already programmed is displayed.
[Enter]
The ECR enters department group name input mode.
Input a department group name.
A maximum of 12 one-byte or 6 two-byte characters are input.
[Enter]
The department group name is entered and printed.
[End]
This programming is ended. A long receipt is issued and the
display returns to Main Menu screen.
NOTES: 1. A maximum of 15 department groups can be set.
2. A maximum of 12 one-byte characters or 6 two-byte characters can be entered. A combination of
both types is also available.
OPERATION
CONDITION
To Next Page
Loading...
Need help?
General
