TEC MA-1350-1 Series - CLK Key Cashier Method; Cashier Reports Overview; Training Procedures

To Next Page

To Previous Page

- 24 -

EO3-11084

MA-1350-1 SERIES

NOTES 1. Do not program any Bit No. shaded and filled with “vacant” in the Address tables on the

following pages. If programmed, performance of the register will not be guaranteed.

2. The Initial Status of each Bit is indicated by a dotted frame such as:

If you have never changed the Bit statuses in the Address before, the Initial Status is active.

Therefore, only the Bit status changes of the required Addresses may be entered. If an All

Memory Clear is operated, all the Bits in all the Addresses automatically regain the Initial

Status.

Programming Example) To select the following options:

Address 1

(refer to the next page)

Bit 1:Time NON-PRINT (SET status)

Bit 5:Department Customer Count NON-PRINT (SET status)

Other Bits are selected to all RESET (PRINT)

Control Lock: SET

@/FOR

#/NS

AT/TL

TEC STORE

1343 PEACH DRIVE

PHONE: 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

11-28-1997 #0

P18

#01 15

0046

Other manuals for TEC MA-1350-1 Series