TEC MA-1350-1 Series - Multi-Tender and Split-Tender Finalization

- 41 -
EO3-11084
MA-1350-1 SERIES
Address : 1 7
(GST Options)
0
▼
Your Selection
▼
Supplementary Description for Address 17:
Bits 2 & 3: If both RESET, ROUND OFF status is obtained. If both SET, Bit 3 status prevails, i.e.,
ROUND DOWN. (For Fraction Rounding Process on Quantity Extension and %
calculations, see Address 2 Bits 1 & 2. As for fraction rounding process on PST
calculations, ROUND OFF status is fixed.)
Bit 5: GST Amount is printed when Bit 6 of this address has been selected to SET status.
Bit 6: If SET status is selected, you can further select printing of PST1 to PST3 on one consolidated
line or separate line. (See Address 16 - Bit 4.)
Bit 8: RESET status ............... Tax Feature for the United States
SET status .................... Tax Feature for Canada (GST)
When the GST Feature is selected, the following features will be unavailable.
• Group Subtotal
• Food Stamp
Initial SET Bit Nos.
1 GST Status
2 Fraction Rounding Process on GST Calculations.
3 Fraction Rounding Process on GST Calculations.
4 GST Taxable Total on Sales Receipts
5 GST Amount Line on Sales Receipts
6 PST & GST Amount Lines Print Format on Sales Receipts
(when Bit 4 is SET)
7 Sale amount subject to PST calculation
8 Tax Feature
Content
Bit
No.
Selective Status
RESET
SET
ROUND UP
GST (exclusive)GST (inclusive)
Follow Bit 3 status
ROUND DOWN
ROUND OFF
PRINT
NON-PRINT
EXCLUDING GST
INCLUDING GST
GST (Canada Tax)
US Tax
NON-PRINT
PRINT
CONSOLIDATED
AMOUNT LINE
SEPARATE
LINES