- 13 -
EO1-11126
MA-1350-1 SERIES
5
6
Insert the paper end into the receipt inlet behind
the printer. Then, feed the paper by hand into the
inside of the printer while pressing the [RF] key
provided at the central upper side of the keyboard
until about 4 inches (about 10 cm) of paper comes
out of the printer.
Cut the excess paper with the attached cutter, and
attach the Printer Cover.
After closing the Printer Cover, depress the [#/NS]
key to check print condition.
VALI
DATE
TX
M
To Next Page
Loading...
