TEC MA-1350-1 Series - Replenishing Ink to the Store Name Stamp

- 49 -
EO1-11126
MA-1350-1 SERIES
3
4
5
6
OFF
REG
X
SET
MGR
-
Z
Remove the old Ribbon Cassette by pulling it in
the direction of the arrow mark.
Install a new one as shown in the figure. After in-
stalling the Ribbon Cassette, turn the knob of the
Ribbon Cassette in the direction of the arrow mark
several times to remove the slack on the ribbon.
After replacing the Ribbon Cassette, attach the
Printer Cover.
Turn the Control Lock to the REG position using
the Control Key, then depress the [#/NS] key to
check the print condition.
Replenishing Ink to the Store Name Stamp
1
OFF
REG
X
SET
MGR
-
Z
Turn the Control Lock to the OFF position using
the Control Key.