Tech Controllers i-2

12
VII. CONTROLLER MENU
1. HEATING CIRCULATION
1.1. BLOCK DIAGRAM OF CENTRAL HEATING CIRCULATION
NOTE
Depending on the number of valves selected, additional options may appear in the menu: Circulation 2,
Circulation 3, Additional circulation 1, Additional circulation 2. Each of these options has a similar submenu to
the one described for Circulation 1.
Central heating circulation
Operation mode
Water tank priority
Parallel pumps
House heating
Summer mode
Summer automatic
mode
Circulation 1
ON
OFF
Pre-set temperature
DHW pump
Operation mode
OFF
Automatic mode
Heating
Pre-set DHW
temperature
DHW hysteresis
DHW pump
activation
temperature
Maximum CH
temperature
Weekly control
Source sensor
Pump anti-stop
ON
OFF