21
6.5. ALARM SOUND
This option is used to activate/deactivate an alarm sound informing about failure.
6.6. BLOCKADE
This function enables the user to lock access to the main
menu. Follow these steps:
1. Select Access Code option
2. Set your PIN code which will enable you to access the
menu
3. Click OK to confirm
NOTE
Default PIN code is 0000. Once the PIN code is
changed, the default code does not work. If you forget
your PIN code, enter 3950.
6.7. SOFTWARE VERSION
When this option is selected, the display shows the logo of the manufacturer as well as the software version used in the
regulator.
NOTE
When contacting Service Department of TECH company it is necessary to provide the software version number.
To Next Page
Loading...
Need help?
General
