Tech4o Traileader - Turn On;Off Hourly Chime; Adjust Backlight Setting; Adjust Temperature Units

8
1.6 TuRn On/OFF HOuRLy CHIME
Access the Time/Date display (See section 1.1 for
how to access the Time/Date display)
• Hold M for 3 seconds to enter Time/Date/System
set menu
• Press LAP/RST(DOwn) to scroll to General
• Press M to select General
* Press LAP/RST(DOwn) to scroll to Sound
* Press M to select Sound
* Press LAP/RST(DOwn) to scroll to Chime
* Press M to confirm your selection
* Press ST/STP(+) or LAP/RST( - ) to select
hourly chime preference
* Press ESC to confirm your selection and
exit Chime
* Press ESC to exit Sound
• Press ESC to exit General
• Press ESC to exit the Time/Date/System set menu
1.7 ADJuST BACKLIGHT SETTInG
Access the Time/Date display (See section 1.1 for
how to access the Time/Date display)
• Hold M for 3 seconds to enter Time/Date/System
set menu
• Press LAP/RST(DOwn) to scroll to General
• Press M to select General
* Press LAP/RST(DOwn) to scroll
to Light
* Press M to confirm your selection
* Press ST/STP(+) or LAP/RST( - )
to select light preference
* Press ESC to confirm your selection
and exit Light
• Press ESC to exit General
• Press ESC to exit the Time/Date/System set
menu
1.8 ADJuST TEMPERATuRE unITS
Access the Time/Date display (See section 1.1
for how to access the Time/Date display)
• Hold M for 3 seconds to enter Time/Date/
System set menu
• Press LAP/RST(DOwn) to scroll to Unit
• Press M to select Unit
* Press M to select Temp.
* Press ST/STP(+) or LAP/RST( - )
to select preferred unit of measure
* Press ESC to confirm your selection
and exit Temp ¬