Tech4o Traileader - Adjust Pressure Units; Adjust Speed & Distance Units; Alarm Mode

9
• Press ESC to exit Unit
• Press ESC to exit the Time/Date/System set
menu.
1.9 ADJuST PRESSuRE unITS
Access the Time/Date display (See section 1.1
for how to access the Time/Date display)
• Hold M for 3 seconds to enter Time/Date/
System set menu
• Press LAP/RST(DOwn) to scroll to Unit
• Press M to select Unit
* Press LAP/RST(DOwn) to scroll
to Pressure
* Press M to select Pressure
* Press ST/STP(+) or LAP/RST( - ) to
select the preferred unit of measure
* Press ESC to confirm your selection
and exit Pressure
• Press ESC to exit Unit
• Press ESC to exit the Time/Date/System set
menu
1.10 ADJuST SPEED & DISTAnCE unITS
Access the Time/Date display (See section 1.1
for how to access the Time/Date display)
• Hold M for 3 seconds to enter Time/Date/
System set menu
• Press LAP/RST(DOwn) to scroll to Unit
• Press M to select Unit
* Press the LAP/RST(DOwn) to scroll
to Other
* Press M to select/other
* Press ST/STP(+) or LAP/RST( - ) to
select your preferred unit of measure
* Press ESC to confirm your selection
and exit Other
• Press ESC to exit Unit
• Press ESC to exit the Time/Date/System set
menu
2.0 ALARM MODE
The Traileader has several alarm features.
Alarm mode can be set for a specific day
of the week, daily, or turned off entirely
• To access the Alarm display while currently
in a:
* TIME MEnu function - continue
pressing M until the display in fig. 6 is
visible ¬
alaRm
TImE mEnu SYSTEm SETTInGS