To Next PageTo Next PageWhat to do if the TechLine MG-150F shows EE or incorrect values?
If your TechLine Blood Pressure Monitor displays 'EE' or shows blood pressure values that seem too low or high, there are several potential causes: * Ensure the cuff is wrapped correctly around your arm. * When re-measuring, pump the cuff 50-60 mmHg higher than your typical systolic pressure. * Remain still and silent during the measurement. Keep your arm steady.
How to fix a TechLine Blood Pressure Monitor with no display?
If your TechLine Blood Pressure Monitor's screen doesn't turn on when you press the power button, the following steps may help: * Replace the old batteries with two new ones. * Make sure that the batteries are inserted with the correct polarity.
Important safety and usage information requiring careful reading before operation.
Explanation of the oscillometric method and how the device determines measurements.
Defines blood pressure, systolic, and diastolic pressure for user understanding.
Explains the importance of monitoring blood pressure due to its correlation with health issues.
Presents WHO/NIH standards for blood pressure categories and the need for physician consultation.
Explains the meaning of various symbols displayed on the monitor, including error indicators.
Important safety and usage information requiring careful reading before operation.
Explanation of the oscillometric method and how the device determines measurements.
Defines blood pressure, systolic, and diastolic pressure for user understanding.
Explains the importance of monitoring blood pressure due to its correlation with health issues.
Presents WHO/NIH standards for blood pressure categories and the need for physician consultation.
Explains the meaning of various symbols displayed on the monitor, including error indicators.
General| Brand | TechLine |
|---|---|
| Model | MG-150F |
| Category | Blood Pressure Monitor |
| Language | English |
