Helpful Tips
Here are a few helpful tips to help you to obtain more accurate readings:
• Do not measure your blood pressure immediately after consuming a large meal. To obtain
more accurate readings, please wait one hour before measuring.
• Do not smoke or drink alcohol before measuring your blood pressure.
• You should not be physically tired or exhausted while taking a measurement.
• It is important that you relax during measurement. Try to take a 20-minute rest before a
reading.
• Do not take measurements if you are under stress or under tension.
• Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a
while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it placed at a warm
location for at least one hour before using it.
• Wait about 20 minutes before taking the next pressure measurement.
Measurement Procedure
1. Press the User-Switching key to select Memory Zone 1 or Memory Zone 2.
2. Place the cuff on the wrist. Press the ON/OFF/START
. All digits will light up, checking
the display functions. The checking procedure will be completed after about 2 seconds.
3. After all symbols appear, the display will show a blinking “0”. The monitor is “Ready to
Measure” and will automatically inflate the cuff to start the measurement.
To Next Page
Loading...
Need help?
General
