Techly IDATA HDMI-MXB88 - Page 17

Doubleclick the “label 1”blankarea.Youwillseethe following page.At“label
2”, you can explain sequence definition. At “label 3”, you need to choose the
sequence mode. At “label 4”, you can input the RS-232 command of the product.
Then click the “OK” button.
Finally, you need to click “label 5” button to send the command.
EN - 17
EN
WWW.TECHLY.COM WWW.TECHLY.COM
8X8 HDMI MATRIX
4K@60HZ YUV 4:4:4 18GBPS