13
Playing a CD
⚫ Turn the unit ON by pressing the Power
button. Set the function knob to CD.
⚫ Place a disc on the tray with the printed label
facing up.
⚫ Press the OPEN/CLOSE button (▲) to close
the tray.
⚫ The total number of tracks will appear on the
display screen.
⚫ The system will start playback automatically after several seconds, or
press the PLAY/PAUSE button (▶‖) to start playback.
⚫ Disc playback starts from the first track, and the PLAY indicator will
illuminate.
⚫ During playback, the number of the track playing will display on the
screen.
⚫ Turn the Volume knob to adjust the volume.
⚫ Press the PLAY/PAUSE button (▶‖) during playback. Playback will stop
at the current position.
⚫ To resume playback, press the PLAY/PAUSE button (▶‖) again.
⚫ Press the STOP button (■) to stop playback.
NOTE:
⚫ Do not place more than one disc in the tray at one time. ⚫ The disc
must be placed in the center of the disc tray. ⚫ If the disc is not properly
inserted, it may not be possible to get the disc out once it has closed.
⚫ Do not force the tray by hand when it is opening and closing.
To Skip to the Next or Previous Track
⚫ During playback, repeatedly press the NEXT/PREVIOUS buttons (◀◀/▶▶)
until the desired track is found. The selected track will play from the
beginning.
⚫ In STOP mode, press the NEXT/PREVIOUS buttons (◀◀/▶▶) repeatedly
until the desired track is found. Press the PLAY/PAUSE button (▶‖) to start
playback from the selected track.
⚫ When the PREVIOUS (◀◀) button is pressed during playback, the track
being played will restart from the beginning. To return to the beginning of
the previous track, press the PREVIOUS button (◀◀) twice.
Search for Part of a Track
⚫ During playback, hold down the NEXT or PREVIOUS buttons (◀◀/▶▶) for
fast backward/forward, then release when the desired section is found.
To Next Page
Loading...
Need help?
General
