19
Stand-by function
⚫ Press the POWER button to enter instant the standby mode. ⚫ The unit
will enter standby mode automatically after 15 minutes when it is not
playing any music. Press the POWER button (1) and it will power on again.
Press any other button and the display lights up for a few seconds.
FAQ’s
Device will not power on
→ Make sure that the unit’s power cord is connected to an appropriate
electrical outlet and the wall socket is switched on.
There is no sound
→ Rotate the power/volume knob clockwise to increase the volume.
The cassette tape will not play
→ Make sure the function knob is set to your desired function. Make sure
it is properly inserted.
The vinyl record will not play
→ Make sure the function knob is set to you desired function. Make sure
you have selected the right speed (33, 45 or 78 RPM).
Nothing will play via the AUX IN connection
→ Make sure the cable is firmly connected and check if external device is
clean and undamaged. Check the function knob is set to your desired
function. Check that volume of external device is at 70-80%.
Nothing will play via the USB device
→ Make sure the memory device is properly inserted in the USB port and
the correct function is selected. The media may need to be formatted.
NOTE: If normal operation cannot be obtained, unplug the power cord from
the power outlet and plug it in again.
To Next Page
Loading...
Need help?
General
