17
AUX mode
Playing Music from an AUX input
⚫ Turn the unit ON by pressing the Power button. ⚫ Set the source to AUX.
⚫ Connect one end of the 3.5mm AUX-IN cable (not included) into the
3.5mm AUX-IN Jack on the front panel of the unit and the other end to your
audio device’s (CD player, Tablet, MP3 player, Smartphone etc.) AUX jack.
⚫ Press PLAY on the external audio source.
NOTE: ⚫ The volume output is affected by the volume level on the source.
Ensure that the source volume is set to about 70-80% to avoid sound
distortion. ⚫ Playback cannot be controlled from the front panel when using
AUX IN mode. Playback must be controlled from your connected audio
device.
Connecting to headphones
⚫ Adjust the volume to an appropriate level before you put on your
headphones. ⚫ Plug in your 3.5mm headphone jack to the headphone
socket.
Connecting to an external amplifier
⚫ This feature enables you to play turntable music through amplifier or
external speakers. You will need an RCA cable to make this connection
(not included).
⚫ Plug one end of the Red and White RCA jacks into the LINE OUT ports
(29) at the back of the TX-137 and the other end into R (red) and L (white)
sockets at the back of the amplifier or external speakers.
Radio Mode
DAB/FM RADIO OPERATION
This device comes supplied with a DAB/ FM antenna. Before first use,
remove the black plastic tie-wrap that is holding the antenna. Keep any
digital devices or mobile phones away from the antenna, as this may lead
to interference of reception. The antenna may need to be re-positioned if
you move the device to a new location.
⚫ Turn the POWER on to select FM or DAB. (1) ⚫ Press the SCAN button
(4) to search your desired radio station while adjusting the antenna location
to obtain the best reception.
To Next Page
Loading...
Need help?
General
