14
Repeat Function
Press the REPEAT/PROG to activate this function. All the tracks can be
played in difference mode as follow:
⚫ Repeat all: you can listen the desired tracks or folder repeatedly by this
function.
⚫ Repeat one: you can listen the desired track repeatedly by this function.
⚫ Random play: you can listen all the tracks or folder in a random order by
this function.
Program Function
Up to 99 tracks can be programmed for mp3 (20 tracks from CD) and be
played in your desired order. Before use, be sure the system is at stop
mode.
1. Go in CD mode and press ■ (13) to stop the CD playback.
2. Press the PROG button (2) “PROG“ will appear on display . Moreover, it
will indicate program no. and digits for track no. to be programmed.
3. Selecting a desired track by pressing SKIP UP/DOWN (3/5)
4. Press the PROGRAM BUTTON (2) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if
necessary.
6. When all the desired tracks have been programmed, press
PLAY/PAUSE (4) button to play the disc in assigned order.
7. To delete the programmed file order, press STOP button again.
USB mode
USB Playback
⚫ Turn ON the unit and adjust the volume to an appropriate level.
⚫ Insert a USB device into the USB port, making sure to insert it straight
without bending.
⚫ Turn the function knob to USB position.
Playback controls
⚫ To pause playback, press the PLAY/PAUSE (▶‖) button once to halt
playing. Press it again to continue playback.
⚫ To play the previous track, press ◀◀ once or hold down continuously to
rapidly progress through previous tracks.
⚫ To play the next track, press ▶▶ once or hold down continuously to rapidly
advance through tracks.
⚫ To stop playback of the music track, press the STOP/ ■ button.
To Next Page
Loading...
Need help?
General
