EasyManuals Logo

Technaxx TX-185 User Manual

Technaxx TX-185
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Model: TX-185 Article No. 4986, 04/2022
One button mute
In the video or recording mode, short press the left button (9). The
microphone at the top of the screen will turn into a prohibited icon,
indicating that the audio recording has been turned off. At this time, the
dashcam only records video files but no audio. Short press the left button
(9) again when the microphone prohibition icon at the top of the screen
disappears, indicating that the recording function with audio is restored.
Note: The settings will be automatically saved and there is no need to set
the mute function after turning on the dashcam again.
Motion detection
When the motion detection function is turned on, a man icon is shown in
the top of the display. As soon as a picture change is detected on the front
camera, the dashcam records automatically for at least 10 seconds. If
further motion is detected the dashcam records as long as motion is
detected. However, the maximum is the set loop recording time.
Note: The motion detection function is only available for the front camera.
The interior camera does not support motion detection but is recorded as
well!
Park monitoring
Prerequisite: The cigarette lighter socket is switched off with the ignition.
The park monitoring function is for monitoring while the vehicle is parked.
When the park monitoring function is turned on, a car icon is shown in the
top of the display. In power off state, the dashcam detects vibrations and
automatically starts to record and lock the file. The recording lasts 10
seconds. After that, the dashcam turns off again.
All videos created in Park monitoring mode without external power supply
are locked video files and cannot be overwritten with loop recording files.
Note: With one charge this function max. last for about 15 recordings
using the internal battery and last for about 4days, depending on how
often the dashcam is triggered. The internal battery needs to be
charged. This is done while normal use.
Playback mode
Stop the recording beforehand. Short press mode button (12) twice in the
power-on state to switch to playback mode. Short press right/left button
(8/9) to find the file to be played back. Short press confirm button (10) to
play. Playback is paused by pressing the confirmation key (10). To exit a

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx TX-185 and is the answer not in the manual?

Technaxx TX-185 Specifications

General IconGeneral
Night visionYes
Product colorBlack
GPS (satellite)No
Housing materialAcrylonitrile butadiene styrene (ABS)
Languages supportCZE, DEU, DUT, ENG, FRE, ITA, POR
Number of cameras1
Main camera sensorCMOS
Maximum frame rate30 fps
Power cable length3.5 m
Supported video modes480p, 1080p
Main camera resolution1920 x 1080 pixels
Main camera sensor size1/4 \
Horizontal field of view100 °
Main camera viewing angle120 °
Video compression formatsAVI
Interior camera resolution0.3 MP
Main camera sensor resolution1 MP
Display diagonal2 \
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Output current1 A
Output voltage5 V
Battery capacity200 mAh
Operating voltage3.7 V
Power source typeBattery, Cigar lighter
Input operation voltage (max)24 V
Image formats supportedJPG
Weight and Dimensions IconWeight and Dimensions
Depth105 mm
Width70 mm
Height45 mm
Weight80 g

Related product manuals