Technica Engineering 1000Base-T1 - Matenet Connector

1000BASE-T1 MediaConverter EMC User Manual
10
2.1.1 MATEnet Connector
Name
Picture
Part Number
Tyco 1-PORT MATENET HDR ASSY 90DEG 9-2304372-9
Tyco MATENET, FEMALE INSERT MODUL,
BLACK
965776-1
Tyco Nano MQS crimp contact 1-1703930-2
Table 2-1: Parts of Tyco MATEnet Connector
Note: You can use the official Tyco tool for these crimp contacts.
The pinning of the ECU connector is shown on the label on top of the device as well.
(See FIGURE 2-1).
The MATEnet connector is for BUS connection to the device under test (DUT).
Warning: If you apply a voltage higher than 18 Volts, the device will be damaged!
Pinning:
Pin
Function
1
Minus
2
Plus
Table 2-2: MATEnet Connector
The 3 pol. MQS connector is for power supply.
Pin
Function
1
Plus
2
Minus
3
Trigger
Figure
2-2: MATEnet Connector