Technica Engineering 1000Base-T1 User Manual

1000BASE-T1 MediaConverter EMC User Manual
13
2.1.4 MicroHDMI connector
This is an interface for programming and debugging (for development)
2.2 Other interfaces
2.2.1 DIP-Switches
The 1000BASE-T1 MediaConverter_EMC has four DIP-Switches for configuration (see
CHAPTER 3).
2.2.2 Status LEDs
The 1000BASE-T1 MediaConverter_EMC has four LEDs at the frontside of the case.
Upper left LED (No. 1):
Green Color. It is lit when there is a linkup on the SFP-Port.
Lower left LED (No. 2):
Yellow Color. It is toggling (approx. 0,5 sec) when the processor is working fine.
Upper right LED (No. 3):
Green Color. It is lit when there is a linkup on the 1000BASE-T1 port.
Lower right LED (No. 4):
Yellow Color. It is lit, if power on. And it is toggling during communication on the
1000BASE-T1 port.

Technica Engineering 1000Base-T1 Specifications

General

Brand	Technica Engineering
Model	1000Base-T1
Category	Media Converter
Language	English