CBR CGA4131COM- User Guide
61 of 61
4. The Gateway prompts you to confirm your choice. Click OK.
5. If you selected Restore Factory Settings, the Gateway will restart. In all other cases, no restart is
needed.
Reset/restore the Gateway via the Reset button
Proceed as follows:
1. Make sure that the Gateway is turned on.
2. If you want to:
Reset the Gateway, use a pen or an unfolded paperclip to push the recessed Reset button on the
front panel of the Gateway for approximately 5 seconds and then release it.
Restore the factory default settings of the Gateway, use a pen or an unfolded paperclip to push the
recessed Reset button on the front panel of the Gateway for at least 15 seconds and then release
it.
3. Restart the Gateway.
Reset Button
To Previous Page
Loading...
