Home Network
Power Wall Plug Repeater 24
NOTE: Ask your network service provider for these
: Select to allow the router to assign a
dynamic IP address to your device.
After modifying any of the above properties, click Apply to save and apply changes.
4.4.2 IPV6 Setting
This page allows you to configure the IPV6 settings of your device.
: Select to link to local network only when
IPv6 address is used. If selected, the IPv6 local address is
shown.
•
: Select to manually configure the IPv6 settings
of your device. If
is selected, the following
properties must be configured:
: Select to allow the router to assign
the IPv6 address to your device and automatically or
manually assign the IPv6 DNS servers.
After modifying any of the above properties, click Apply to save and apply changes.