Technicolor TG213 - AP Mode Wireless Settings

Home Network
Power Wall Plug Repeater 28
4.5.2 AP Mode - Access Point
Basic
The Basic page allows you to configure the basic wireless settings.
Properties
Description
2.4g Basic
SSID
If you wish to modify the default SSID assigned to the
2.4Ghz band, type the preferred network name on this box.
AutoChannel
Check the box to select auto channel option.
Channel
If
AutoChannel
is not selected, you may select the
Channel
from this box.
802.11 Mode
Limit the type of wireless clients that can connect to your
device by selecting the 802.11 protocol.
Channel Width
Select the channel width.
5g Basic
SSID
If you wish to modify the default SSID assigned to the 5Ghz
band, type the preferred network name on this box.
AutoChannel
Check the box to select auto channel option.