Technicolor TG213 User Manual

Home Network
Power Wall Plug Repeater 29
Properties
Description
Channel
If AutoChannel is not selected, you may select the Channel
from this box.
802.11 Mode
Limit the type of wireless clients that can connect to your
device by selecting the 802.11 protocol.
Channel Width
Select the channel width.
After modifying any of the above properties, click Apply to save and apply changes.
Security
The Security page allows you to configure the authentication and password settings
of your device to protect it from unauthorized access.
Properties
Description
2.4g Security
Authentication Type
To protect your device from unauthorized access, select and
configure the authentication type that connecting devices
must use to connect to the 2.4Ghz band.
•
Disable
: Select if you will not require authentication to
connect to your device.
•
WEP
: Select if you wish to use the WEP security for
authentication. Select
WEP
,
Mode
, and
WEP Key
, and
then type the
Key
on the allotted box. Connecting
devices must enter the correct WEP key to establish
connection.
•
WPA/WPA
-
2Personal
: Select if you wish to use the
WPA/WPA-2 security for authentication. Then, type the
Passphrase
on the allotted boxes. Connecting devices
must enter the correct WPA/WPA-2 passphrase to
establish connection.

Technicolor TG213 Specifications

General

Brand	Technicolor
Model	TG213
Category	Repeater
Language	English