Product Overview
Power Wall Plug Repeater 5
1.3 Product Overview
1.3.1 Front Panel
Lights up when the device is powered on.
• Solid GREEN – Indicates the device is powered ON and
operating normally
• Flashing GREEN – Indicates Ethernet traffic in progress
• Solid RED – Indicates the device is powering ON or the
system is defective.
• Flashing RED – The device is in recovery mode or the
device has malfunctioned.
• Flashing ORANGE – Cannot connect or be assigned an IP
address from the router
• Off – The device is powered off.
Lights up to indicate wireless connection.
• Solid GREEN – A wired connection is established.
• Flashing GREEN – Data transmission is in progress.
Lights up to indicate link activity.
• Solid GREEN – Wireless link between the Repeater and
the AP is above -55dBm RSSI
• Solid ORANGE – Wireless link between the Repeater and
the AP is above -75dBm and
-55dBm RSSI
• Solid RED – Wireless link between the Repeater and the
AP is below -75dBm RSSI
To Next Page
Loading...