Technicolor TG213 - Repeater Mode Wireless Settings

Home Network
Power Wall Plug Repeater 25
4.5 Wireless Menu
The Wireless menu varies depending on the selected mode.
4.5.1 Repeater Mode
Wi-Fi Settings
The Wi-Fi Settings page allows you to connect to a router/network and extend its
signal to allow wireless clients to connect to the network via your device.
Properties
Description
Wireless Mode
Click Site Survey to search for the wireless network you wish
to extend. The list of available network appears, select and
click
Connect
.
SSID
Displays the SSID of the wireless network selected from
Site
Survey
or the last connected network.
Authentication Type
Select the authentication type needed to connect to the
wireless network.
•
Disable
: Select if authentication is not required to
connect to the wireless network.
•
WEP
: Select if the network uses the WEP security setting.
Select
WEP
,
Mode
, and
WEP Key
, and then type the
Key
on the allotted box.
• WPA/WPA-2Personal: Select if the network uses the